MC 601 Manual do Utilizador descarregar pdf (Página 9)

5.2 Separate assembly on the wall

The bracket for wall mounting enables you to

mount MULTICAL

601 directly onto a straight wall.

Use the bracket for marking and drilling two holes,

6 mm in diameter, into the wall.

5.3 Assembly in a panel

MULTICAL

601 can be mounted straight into panels, using the panel assembly set

Kamstrup, no. 66-99-104 (192 x 144 mm).

6. Power supply

MULTICAL

601 can be powered by a built-in lithium battery; 24 VAC internal supply

module; or 230 VAC internal power module.

Two conductors from the battery or main voltage module are connected to 60 and 61

calculator clips.

When connecting the conductors, polarity must be kept; connect the red

conductor into clip no. 60 (+), and black conductor into clip no. 61 (-).

6.1 Battery supply

MULTICAL

601 is connected to a lithium battery (cell D). The battery is marked with

installation year, e.g. 2007, and production year.

Optimum battery life is reached if the battery is not exposed to temperatures above

30°C, e.g. by placing it on a wall.

Lithium battery voltage remains constant for most of its life (ca 3.65 V). The

remaining battery capacity thus cannot be determined by voltage measuring.

The battery cannot be, and is not allowed to be, recharged; it also must not be short-

circuited. Empty batteries must be handed in for required liquidation, e.g. to the

Kamstrup Company.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

MC 601 Manual do Utilizador Página 9